bing tracking image
  1. Camper Jacks
  2. Stromberg Carlson
  3. Leveling Jacks
  4. Stabilizer Jacks
  5. Fifth Wheel Camper
  6. Electric Jack
  7. Landing Gear
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs

Item # LG-4
Retail:$999.69
Our Price: $766.91
You Save: $232.78
Camper Jacks
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K. 1-800-940-8924 to order Stromberg Carlson camper jacks part number LG-4 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Great prices and Fastest Shipping for Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (169)
  • Q & A (0)
  • Photos

Stromberg Carlson Camper Jacks - LG-4

  • Leveling Jacks
  • Stabilizer Jacks
  • Fifth Wheel Camper
  • Electric Jack
  • Landing Gear
  • 6001 - 7000 lbs
  • Stromberg Carlson
  • 2 Jacks
  • 35 Inch Lift
  • Weld-On
  • Steel

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.


Features:

  • Perfect for raising, leveling, and supporting your 5th-wheel trailer or RV
  • Direct-drive motor reduces strain on your jack and allows landing gear to lift with ease
    • No clutch that could slip
  • Single-speed motor won't trip circuits or cause problems with coach's electrical systems
    • IP-rated switch will not spark, so it can be mounted safely in bottle-gas area
  • Drop legs minimize jacking time and help to level the trailer on uneven ground
    • Legs adjust in 1" increments
  • Cage pins included to release drop legs
    • Upgrade to spring-loaded pull pins (LG-119113 - sold separately) for simpler drop leg release
  • Hand crank included for manual operation
  • Heavy-duty steel construction
  • Gearbox is housed in a corrosion-resistant aluminum body
  • Landing gear welds onto trailer frame
  • Set includes 2 jacks, gearbox, motor, switch, footplates, cross shaft, hand crank, and hardware
  • Made in the USA


Specs:

  • Leg length: 33-1/2"
  • Total lift: 34-7/8"
    • Travel: 19-7/8"
    • Drop leg: 15"
  • Combined weight capacity: 6,500 lbs
  • 1-Year warranty


Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.


Stromberg Carlson's landing gear was designed with safety in mind. The motor, manufactured by Lippert, won't trip circuits or cause problems with the coach's electrical systems. In addition, the IP-rated switch will not spark, so it can be mounted safely in the bottle-gas area.


Convenience is also a hallmark of this product. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.


This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from Stromberg Carlson using your existing mounting hardware.



LG-4 Stromberg Carlson Deluxe Electric Landing Gear for Fifth Wheel

Installation Details LG-4 Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs - LG-4

Average Customer Rating:  4.6 out of 5 stars   (169 Customer Reviews)

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.

by:

Jacks has functioned very good over the last year. No problems or issues encountered .



by:

Landing gear was exactly what I ordered. Prompt delivery. Package was perfect. Landing gear just not as heavy duty as I hoped. I'm sure I will be replacing it again in a few years.



by:

Just what I needed, fast shipping, great product.



by:

I'm typically not one to complain or write a poor review however, E-Trailer has produced very poor customer service and product handling. I called and ordered this landing gear over the phone to ensure with a representative that I was getting the correct part. My concern was the weld stops mounting up to my current brackets. The representative ensured they would fit after reviewing specs. When the legs arrived I was surprised by how poor the packaging was upon opening the makeshift packaging the legs looked like they were used and they were missing several parts. I contacted customer service they offered a $[XX] discount and part replacement. When I went to install the legs, I discovered that they would not fit my brackets and the measurements the representative gave we not accurate. I called customer service again. The end result was I had to purchase another set of legs and wait up to 14 days to get reimbursed for the legs which were the wrong fit. I requested a discount of some sort due to the inconvenience this caused. The supervisor offered expedited shipping and that is all. If I wasn't in a situation in which I needed new legs to repair my 5th wheel, I would have definitely gave my business to another company.



by:

Nice direct fit easy install and work w ell

Chris

8/10/2023

Still love them and work well



by:

I have a 2010 Bighorn 3055rl and these jacks were an exact match to the failed jacks so installation was simply a reverse of the removal. All of the necessary parts were included for a full replacement. The quality seems similar to the originals. I hope they last longer and they should as I have changed how I operate them. In my opinion, they did not come with enough grease on them and that may also be part of the reason the original jacks failed. I put plenty of grease on these.

Joey

11/22/2019

Still working as expected.



by:

I purchased this landing gear to replace the RBW landing gear on a 1998 Mallard made by Fleetwood. Only one side of the RBW was bad, but I was unable to find parts to repair it. I had to weld new brackets to the legs to match the existing U brackets that were already welded to the frame of the 5th wheel. Everything went smoothly with the installation until I went to hook up the square tubing for the cross bar that ties the legs together. The tubing was about 8" too short to reach from one leg to the other. Luckily I was able to use the cross bars from the original RBW gear. I am not sure why the Stromberg Carlson cross bar was so short because my 5th Wheel is a standard width. Other than that it looks like a good product.



by:

We have used the camper jacks at least 11 times and they have worked perfectly & also operates very quietly. We are very pleased with them & give it a 5 star rating.



by:

I put them on they will lift the trailer by hand but motor can’t lift is there a strong motor for this you Customerservice said it would lift this trailer it is a Fleetwood terry 5th wheeler



by:

I could not find exactly the right size that I need it for the front of my 40 foot Jayco fifth wheel however this unit work just fine and has given me a year’s good service no problems no complaints



by:

Box was torn apart all parts were still in it plus some stuff that didn’t belong



by:

Product was exactly what I needed. We only had to make one modification to the legs so that we did not have to weld in the new straps. Works perfect.
I would love that it instructions would have shown the picture as if you were facing the equipment.



by:

Best way to go even if your just fixing your ecisting jacks. They have made many improvements to the motor and gear box.



by:

Product arrived in excellent shape (UPS shipper), had all parts, instructions, and installed as specified. I shop etrailer because of price, quality and delivery. Great bunch of folks if you have questions.



by:

Landing gear package was everything i needed and fit perfectly. Installed and working great.



by:

The service was great and when I received the item and noticed a part was missing I made one phone call and got the issue resolved

Thank you for great service



by:

I wasn't sure about this product when I ordered it. I measured my old unit several times and everything seemed to match. I was very pleased to find everything I found on the website was correct and the install went much smoother than I anticipated. Very happy with the end result.

Murray



by:

was pleased with the service and shipping time. Have it half installed as it is raining now with a lake under the front.



by:

VERY satisfied



by:



by:



by:



by:



by:



by:


25
169
Show More Reviews

See what our Experts say about this Stromberg Carlson Camper Jacks

  • Replacement Landing Gear For A 2004 5th Wheel, Brand KZ New Vision Ultra
    The Stromberg Carlson Electric Landing Gear Set # LG-4 will work with your 2004 5th Wheel KZ New Vision Ultra per the vendor. This system is perfect for raising, leveling, and supporting your 5th-wheel trailer or RV. The direct-drive motor will reduce the strain on your jack and allows the landing gear to lift with ease. The system has a hand crank included for manual operation if needed. The landing gear has a heavy-duty steel construction. The gearbox is housed in a corrosion-resistant...
    view full answer...
  • Solution for Needing Replacement Motor for Atwood MPD 7119 Landing Gear
    I wish we had a motor that would work for you, but we recently found out that none of our motors fit the now discontinued Atwood landing gear sets. Best option is a new powered landing gear set like the # LG-4 which uses a higher speed motor and has a higher capacity at 6,500 lbs. I attached a review video for this landing gear set for you to check out as well.
    view full answer...
  • Can the Stromberg Carlson Electric Landing Gear Set LG-4 Be Bought Without the Motor
    In order to piece together a kit similar to the Stromberg Carlson Electric Landing Gear Set part # LG-4 but without the motor you will need to obtain the following: Replacement Lead Leg for Stromberg Carlson Landing Gear - part # LG-177202 Replacement Follow Leg for Stromberg Carlson Landing Gear - part # LG-177201 Replacement Footpad and Pin for Stromberg Carlson Landing Gear - part # LG-119225 (2) Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear - part # LG-179015 Replacement...
    view full answer...
  • Troubleshooting Powered Landing Gear That Won't Operate Under Load
    Thank you for clearly describing the issue with the motor on one of your landing gear legs. When a jack motor operates when there is no load on it but fails to operate when there is a load this usually relates to a loose power connection. Check both of your power leads to that motor to ensure that both ground and hot connections are absolutely tight. A weak ground will deliver some power but often not enough to lift. When a jack operates in the retract direction but not in the extend...
    view full answer...
  • Replacement Landing Gear Leg Set for a 1998 Fleetwood Terry 5th Wheel Trailer
    In order to make sure we get the best set of landing gear legs for your 1998 Fleetwood Terry 5th Wheel Trailer, I would need to know how long the outer tubes are on your existing landing gear legs. If they are 29-1/2" long then I recommend using the Stromberg Carlson Electric Landing Gear Set part # LG-3 but if they are 33-1/2" then I recommend using the Stromberg Carlson Electric Landing Gear Set part # LG-4. The location of the mounting bracket on your trailer now should line up with...
    view full answer...
  • Landing Gear to Replace Ultra Fab Set that is Failing
    If you're having bad luck with the Ultra Fab landing gear jacks then I would recommend going with a new landing gear set like the Stromberg Carlson part # LG-4. This will require moving the mounting brackets on your trailer but it will work great and be more reliable than your Ultra Fab setup.
    view full answer...
  • Solution for Needing Replacement Motor for Fulton Trailer Landing Gear
    I did some checking and the Fulton line of landing gear was discontinued in 2000 and there are no longer any replacement parts listed for it. I wish there was just a motor kit I could recommend for you but you'll have to look into a new set of powered landing gear. For a replacement we have the Stromberg Carlson part # LG-4 which will match the bracket dimensions you have now and has a 6,500 lb capacity which means it will raise and lower your trailer quickly and last a long time due...
    view full answer...
  • Replacement Landing Gear Legs for a 2010 Jayco Eagle Super Lite
    I have attached a photo for you that shows how to properly measure the outer tube on a landing gear leg. I have not heard of a landing gear leg with a 36-1/2" long outer tube so if this is what you have then I recommend you replace both the lead and follow legs so that you can be sure they match. For this, the correct replacement for you should be part # LG-177202 for the lead leg and part # LG-177201 for the follow leg. In order to make sure they will work you need to measure between...
    view full answer...
    Image 1 for
  • Landing Gear Stop Extending When They Hit the Ground but Motor Still Runs
    Your landing gear losing power could mean a couple of things, but the mostly likely cause is a not fully charged or bad battery. When the landing gear operate, they don't use a lot of power until they hit solid ground; when they hit the ground, the power required to operate them increases since they're now carrying the load of the trailer. The first item to check is whether or not your manual crank is working properly. If the jacks will not operate with the manual crank, the likely cause...
    view full answer...
  • Replacment for Atwood Landing Gear on 1997 AlpenLite 5th Wheel
    Unfortunately, we don't offer a single replacement leg of that type that would have a motor on each leg. Your best bet would be to replace your existing landing gear with something like the Stromberg Carlson # LG-3 or # LG-4 which has the same sized legs, 29-1/2 inches in length and and outer dimension of 2-1/2 x 2-1/2 inches. The landing gear have a 6500 lb combined capacity. This system and its parts were designed to be compatible replacements for most of the other fifth-wheel landing...
    view full answer...
  • 5th Wheel Landing Gear Replacement for 2011 Wildcat by Forest River Model 31TS
    You could use the Landing Gear part # RVLG-8HDL as a replacement for what you have now on our 2011 Wildcat by Forest River. This will bolt right up in place of what you have and has plenty of capacity at 8,000 lbs so it will operate easily.
    view full answer...
  • How Do You Determine What Landing Gear Is On Your Trailer?
    If there isn't a brand name printed on a tag somewhere on the actual landing gear it is not easy to determine because they all look and function the same way. The nice part about that is that if you need to replace parts or complete systems they are fairly universal and just require the proper weight rating or style. I've attached a link to our page to assist. One help is to measure brackets welded to your frame. The distance between them will help in determining a correct replacement. If...
    view full answer...
    Image 1 for
  • Recommendations For Complete Fifth Wheel Landing Gear For 2004 Jayco Eagle
    I do have a couple of solutions for you that will work for your 2004 Jayco Eagle fifth wheel. Upon first glance, it appears that your landing gear might have been made by Venture, which is not one of our vendors, but we sell other systems that will work well. I recommend using the Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs # UF17-943010. This landing gear will allow you to adjust independently for easy and quick leveling. The leg will travel 1 inch every 15 seconds,...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Troubleshooting One Leg on Landing Gear Not Working
    Although you did not mention if it is the lead or follow leg that is not working, if it is the follow leg it may be that you have an issue with the gearbox and would need to replace it with Replacement Aluminum Gearbox # LG-179015 which will work with Stromberg Carlson landing gear as well as Lippert and Venture. Another option that could work is using a repair kit such as the Lead Jack Repair Kit for Stromberg Carlson Landing Gear # LG-146059 or Follow Jack Repair Kit # LG-146060 depending...
    view full answer...
  • Replacement Landing Gear Recommendation for a 2010 Cedar Creek Silverback 5th Wheel Trailer
    I recommend replacing your entire landing gear set with part # LG-4, which has 33-1/2" tall outer tubes, because you know you are getting a completely new system (with the manual hand crank, motor, and switch) so you don't have to worry about whether or not your follow leg was damaged and will go out soon. This is rated for 6,500 lbs and will give you the confidence and peace of mind that your system is upgraded and you won't have any issues while you are out camping. The Replacement Lead...
    view full answer...
  • Troubleshooting Landing Gear on Fuzion Toy Hauler That Will No Longer Lift Trailer
    It sounds like the landing gear on your Fuzion Toy Hauler may have been overextended, which likely caused damage to the internal gears and screw. This "flopping" that you mentioned is essentially the unit trying to extend but since the internal components have been compromised, it is unable to operate properly, which is producing that extensive vibration and shaking on the leg and motor. Your best option at this point is likely to replace the entire system. I recommend taking a look at...
    view full answer...
    Image 1 for
  • 2006 NuWa Discover America Landing Gear Replacement Motor
    If it has recently slowed down there may be a weak battery or wiring issue that you need to look at. After confirming your battery has a good charge. Check the connections either the connectors are corroded and not making good contact or the wiring has been compromised. If the wiring is in good shape and the connections look good then the motor may very well be going bad. The gear box will slip and clang and even produce a ratcheting sound but really doesn't effect speed. It just goes or...
    view full answer...
  • Replacement Follow Leg For RV Stabilizer Gear
    Great question, I do need some more information though. There should be a sticker or stamp somewhere on the legs of the jacks. We need to find out the make and model of the actual unit so we can get the proper one. This information is needed because each brand will have differences in materials, ratios, even balance that can cause the unit to fail or work improperly and cause damages. Also if we get the model number we can get the correct weight capacity and not have to worry about...
    view full answer...
  • Landing Gear on a 2009 Keystone Copper Canyon 30’ 5th Wheel Operates Inverse of Control Switch
    Sometimes the different color wiring won't match up. This is something that we see on vehicles all the time. If your landing gear, like part # LG-4, is doing the opposite of what you're telling it to do then you simply need to swap your wires.
    view full answer...
  • Is There a Higher Rated Landing Gear Set with Electric Motor than 6,000 lbs
    The only single motor landing gear set we offer with a higher rating than the Lippert Electric Landing Gear Set part # LC333964 which is rated at 6,000 lbs is the Stromberg Carlson Electric Landing Gear Set part # LG-4 which is rated at 6,500 lbs. The higher rating should help the jacks lift the trailer slightly faster but the issue with the old jacks was likely just the motor going bad rather than it being underrated. I'd also make sure the battery is topped off as that can affect the...
    view full answer...
  • Replacement Landing Gear Follow Leg for 2003 Keystone Everest
    We can get you un-stranded! The correct follow leg for your landing gear is going to depend on how long it is. If your leg measures 29-1/2" (see attached photo), you would need replacement # LG-179014, which can be used with most landing gear sets Atwood, Venture, and Lippert models. The same is true of replacement # LG-177201, which you would use if your leg measured 33-1/2". I've attached a link to a video review for you to take a look at as well.
    view full answer...
    Image 1 for Image 2 for
  • Landing Gear On A 2018 Jayco CKTS 5th Wheel Will Not Raise Or Lower Trailer
    There could be a number of reasons why your Stromberg Carlson Electric Landing Gear Set # LG-4 isn't working properly. Since you have recently replaced the battery, an old battery won't be an issue, however I would still verify that the battery you're using is rated for the appropriate amperage that the jack requires. If you have a battery that isn't able to supply the amount of amperage to operate the jacks, then that very well may be your issue. I also recommend verifying that all of...
    view full answer...
  • Best Landing Gear for a 2008 Arctic Fox 27-5L Fifth Wheel
    Yes, we do have a set of landing gear for your 2008 Arctic Fox 27-5L fifth wheel. I recommend the Stromberg Carlson Electric Landing Gear Set item # LG-4. This landing gear has a 34-7/8" lift, has a capacity of 6,500 lbs, and comes with a one year warranty. The weld stops measure 17-1/2" inside to inside, and 19-1/2" outside to outside. This is an essential measurement that you will need to verify on your fifth wheel to ensure you don't need to weld/fabricate on brackets.
    view full answer...
  • Is there a Replacement Motor for Atwood Landing Gear on a 1989 Mallard Coach Prairie Schooner
    Does the motor have any identifying numbers on it? Atwood no longer makes landing gear. That division was picked up by another company. But there is a list of motors and replacements that could be used if there is an equivalent made by the other company. Otherwise the remaining option is to replace the landing gear completely. I have included a link to all of the electric landing gear options available. If your existing system has the motor(s) mounted vertically on top of the legs then...
    view full answer...


< Previous



Do you have a question about this Camper Jack?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Shelly K
Updated by:
Shelly K
Employee Mike S
Updated by:
Mike S
Employee Wilson B
Written by:
Wilson B
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.